Operation; Installation; Led Indication - Maximum WSR-4000 Bedienungsanleitung

CONNECTION & OPERATION

Operation

A. Installation
1. Make sure your input AC voltage conforms to the adaptor
specifications.
(Only use the power adaptor provided with the WSR-4000. If
you use your own adaptor, make sure the output connector is
micro USB and power output is DC 5V /1A.)
2. With direct line-of-sight, the maximum range of A/V signal
transmission can reach up to about 10 metre, and this distance
would be shortened by obstacles or walls placed between
transmitter and receiver. (The optimum indoor range is less
than 10 metre)
B. TX & RX Pairing MODE
1. First Press "PAIRING" key once on the Receiver BOX.
2. Then Press "PAIRING" key once on the Transmitter BOX.
3. Connection will be auto-established and successfully paired.

LED Indication

There are LEDs for indication of System operation, for more detail
please check the table below:
Condition
Startup Power on
& No connection
PAIRING
Connection & Play
TX
White LED Flashing
White LED Flashing
LED solid White
ENGLISH
RX
White LED Flashing
White LED Flashing
LED solid White
Note: To prevent
overheating, please do
not cover WSR-4000
Transmitter and
Receiver with any
object.
6