Qlima FSM 40 TOUCH Bedienungsanleitung Seite 49

man_FSM40 TOUCH ('19) V2.indd 49 man_FSM40 TOUCH ('19) V2.indd 49
Remote control is supplied with battery inside ; remove the transparent sheet
from the battery cover before use remote control.
When the battery is over, it must be replaced with the same type following
the drawing on the back of remote control.
ON/OFF Button (A):
• Press On/Off button one time to activate the fan. The indicator light (7) will
on on the control panel. You can now press MIST (F) button to select the
misting function without fan operation (mist only).
• Press On/Off button a second time to turn on the fan: the unit will operate at
low speed and the related indicator light (4) will be on on the control panel.
You can now select other functions (speed, mode, timer, mist).
• Press On/Off button when the unit is on to turn off it.
SPEED Button (B):
• To start the fan at low speed, press On/Off button (A) twice (when unit is
Off): the unit will operate at low speed and the related indicator light (4) will
be on on the control panel.
• Press speed button one time to select the medium speed: the related indicator
light (4) will be on on the control panel.
• Press speed button another time to select the high speed: the related
indicator light (4) will be on on the control panel.
Cyclic function.
MODE Button (C):
• When you press the On/Off button twice, the fan will operate in Normal
mode (there isn't any indicator light in the control panel that indicate this
mode).
• Press mode button one time to change to Natural mode: the unit simulates
a natural breeze mode and the related indicator light (1) will be on on the
control panel.
• Press mode button another time to change to Sleeping mode: the unit
simulates a soft breeze suitable for night time use. The related indicator light
(2) will illuminate on the control panel.
• Press again mode button to change to Normal mode (there isn't any indicator
light in the control panel that indicate this mode).
Cyclic function.
TIMER Button (D):
• When the unit is operating, you can set the timer to switch the fan off
automatically after the set time. Press the timer button repeatedly to select
the desired time period in half hours increments: 0,5h, 1h, 1,5h ....7,5h. The
related indicator light (5) will illuminate on the control panel. When all the
light (5) are off means that time is not setted and the unit will continuously
work until you switch off manually the unit.
OSCILLATION Button (E):
• Press the oscillation button to activate the automatic oscillation from right to
left. The related indicator light (3) will illuminate in the control panel.
• Press again the oscillation button to deactivate the automatic oscillation; the
indicator light (3) will off on the control panel.
4
49
26-11-19 14:10 26-11-19 14:10