P.Lindberg SPG500 Original Bedienungsanleitung Seite 55

⚠ Before undertaking any kind of activity in the vicinity of the machine or before
transporting the machine, always ensure that the engine is switched off and moving parts
have stopped moving. Always switch off the engine if machine is to be left unattended!
⚠ Do not attempt to stop the blades faster by pushing the blades against the ground (e.g.
by lifting the rear of the machine by pushing down on the handlebar).
⚠ Keep a secure grip of the handlebar while the blades stop, so that the machine does not
move out to the side because of friction between the ground and the machine!
⚠ Never allow the machine to operate for long periods of time at full throttle without load
and with the blades disengaged! The machine's components (drive belt, pulley, clutch etc.)
can become damaged.
⚠ Before the work begins, the work area must be cleared of any foreign objects, e.g. stone,
wire, construction materials etc. that could be ejected by the machine or which could
damage the machine. If the items cannot be removed then avoid using the machine in this
area.
⚠ The machine is equipped with rotary blades which can eject material at high speed.
Therefore ensure that people keep to a safe distance from the machine when it is
operating in order to avoid being hit by ejected cut material or ejected foreign objects!
⚠ In regard to exceeding the recommended values for noise and vibrations, the following
instructions must be followed when working with the machine:
a) Wear ear defenders
b) Do not operate the machine for more than 20 minutes at a time. Take breaks of at least 10
minutes. While taking a break, the user must not expose himself/herself to other sources of
vibration.
⚠ Wear tight-fitting clothes, robust shoes and gloves and safety goggles. Keep to the safe
distance from the machine that using the handlebar allows.
⚠ Never start the engine in enclosed areas! Exercise extreme caution when using the
machine – the exhaust will continue to be hot after the engine has been switched off.
Ensure that fuel is not spilled when re-filling or spilled from leaks. If for whatever reason
fuel is spilled, wipe it up immediately.
⚠ Make sure that no persons – and especially no children – or animals are inside the
working area.
⚠ It is forbidden to remove the safety devices from the machine.
P. Lindberg A/S
Tel.: +45 70212626
4
Sdr. Ringvej 1
6600 Vejen, Denmark
MAN 9061505 EN V1
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk