For Your Information - Vigor V 2479 Betriebsanleitung

For your information

1. General information
Please ensure that tool users have carefully read these operating instructions and fully understand all
information given before the tool is used.
• These operating instructions contain important advice that is necessary for the safe and trouble-free
operation of your ViGOR tool.
• For appropriate use of the tool, it is essential that all safety and other information in these operating
instructions is adhered to.
• For this reason, always keep these operating instructions together with your ViGOR tool.
• This tool has been designed exclusively for specific applications. ViGOR wishes to emphasise that any
modifications to the tool and/or use of the tool not in line with its intended application is strictly
forbidden.
• ViGOR does not accept any express or implied warranty or liability for any injuries to persons or damage
to property caused by improper application, misuse of the tool or a disregard of the safety instructions.
• Furthermore, the accident prevention and general safety provisions relevant for the application range
of this tool must be observed.
2. Liability and express or implied warranty
• Any deviation from the intended use and/or any misapplication of the tool is not permitted and will be
considered as improper use.
• Any claims against the manufacturer and/or its authorised agents resulting from damage caused by
improper use of the tool are invalid.
• Any personal injury or material losses caused by improper use of the tool are the sole responsibility of
the owner.
3. Spare parts
• Use only the manufacturer's original spare parts.
• Unsuitable or defective spare parts may cause damage, malfunction or total failure of the tool.
• The use of non-approved spare parts will void all warranty, service and liability claims as well
as all claims for compensation against the manufacturer or its agents, distributors and sales
representatives.
4. Disposal
• For disposal, clean the tool and disassemble in accordance with the regulations for work safety and
environmental protection. Components can be recycled.
• Metal components can be scrapped.
10