General Information; For Your Information - Vigor V4385N Betriebsanleitung

1. General information

Please ensure that tool users have carefully read these
operating instructions and fully understand all information
given before the tool is used.
• These operating instructions contain important advice that
is necessary for a safe and trouble-free operation of your
VIGOR Oil Filling System.
• For effective use of the VIGOR Oil Filling System as intended,
it is essential that all safety and other information in these
operating instructions is adhered to.
• For this reason, always keep these operating instructions
together with your VIGOR Oil Filling System
• This tool has been designed exclusively for specific
applications. VIGOR wishes to emphasise that any
modifications to the tool and/or use of the tool not in line
with its intended application is strictly forbidden.
• VIGOR does not accept any express or implied warranty
or liability for any injuries to persons or damage to property
caused by improper application, misuse or a disregard of
the safety instructions.
Furthermore, the regulations for the prevention of
accidents valid for the application range of this
device must be observed and respected.
8
VIGOR GmbH
[ +49 (0) 21 91 / 97 95 • \ +49 (0) 21 91 / 97 96 00 • ] info@vigor-equipment.com • ^ vigor-equipment.com
• ; Am Langen Siepen 13-15 • 42857 Remscheid • GERMANY

2. For Your Information

2. For Your Safety
Explanation of symbols
NOTE: Please pay particular attention to
these symbols!
READ THE OPERATING INSTRUCTIONS!
The owner is obliged to
observe the operating
instructions and should
ensure that all users of the
VIGOR Oil Filling System use
it according to the infor­
mation given.
NOTE!
This symbol indicates
advice which is helpful
when using the device.
CAUTION!
This symbol indicates impor­
tant specifications, dan­
gerous conditions, safety
risks and safety advice.
ATTENTION!
This symbol indicates
advice which if disregar­
ded results in damage,
malfunction and/or func­
tional failure of the device.
FACHLEUTE!
The tool may only be used
by qualified personnel.
Handling by non­qualified
people may lead to injuries
to persons or damage to
the tool or workpiece.