WMF Lineo Gebrauchsanweisung Seite 12

Start-up
Please clean all parts as described in the 'cleaning and care' section before allow-
ing them to come into contact with food.
▪ Place the container (2) on the drive unit (5) and lock in place by twisting in a
clockwise direction. Click the container (2) into place.
▪ Remove the protective cover from the stainless steel blade (3) and insert the
steel blade (3) into the slot at the bottom of the container (2) .
Caution: The blade is sharp. For this reason, always replace the protective
cover when the blade is not in use.
▪ Insert the food, seal the container (2) with the lid (1). Place the food in the
container (2) no higher than the MAX mark.
Close the lid (1) by twisting in a clockwise direction, the lid (1) clicks in. Ensure
the lid is fitted correctly (see diagram)
▪ After connecting the mains plug, select the desired speed setting on the speed
control (4). Now briefly press down the impulse ring on the lid (1) several
times (see diagram) until the desired result is achieved.
▪ Always wait for the blade (3) to come to a standstill before removing the lid
(1).
Safety function
The motor of the multi-chopper will only start when the container (2) and lid (1)
are attached correctly. Do not remove the lid (1) while the device is operating.
12