Error Messages; Technical Data - ADE KE 1501 Lilou Bedienungsanleitung

Thank you for deciding to purchase this high-quality product from the WAAGEN-
SCHMITT Company. You have purchased a set of scales of the highest technical
standard and proven quality. Please read through this operating manual carefully before
starting-up the scales for the first time, and keep it in a safe place so that this information
is available to you when you need it.
1. Start-up
Inserting the battery:
Open the battery compartment cover on the underside of the scales and insert the
provided batteries (2 x 1.5V AAA). Please be mindful of the correct polarity of the
batteries (+/-).
Safety information:
Please take care not to let any objects fall onto the scales,
otherwise the scales could be damaged.
Only clean the scales with a damp cloth. Do not use any solvents
or abrasive cleaning products. Do not immerse in water. All plastic
parts of the scales should be cleaned immediately after contact
with fat, spices, vinegar and other strongly seasoned and coloured
foodstuffs. Avoid contact with citric acid.
2. Operation
Activating the sca les:
Place the scales on a firm, even surface and press the
display. After activating the scales, all of the symbols will initially appear on the display;
once the scales have stabilised (Indicator:
following indicator appears:
0 g (grams) / 0: 00 lb:oz (pounds ounces)
0 ml (millilitres milk) / 0.0 fl'oz (fluid ounces milk)
0 ml (millilitres water) / 0.0 fl'oz (fluid ounces water)
The scales are now ready for weighing.
Plea se note: If a weight-value is shown after activation, press the
set the scales to zero.
Units of weight:
By pressing the MODE button underneath the display, you can change the weight-unit in
/ZERO button underneath the
symbol), depending on the settings, the
/ZERO button, to
2
the following order: grams/pounds ounces/millilitres milk/fluid ounces milk/millilitres
water/fluid ounces water. Press the MODE button as many times as necessary until the
relevant weight-unit appears on the display. When using the scales, please ensure that
they are set to the weight-unit that is relevant to you.
Zeroing (tare) func tion:
By pressing the /ZERO button, you can set the scales to "0 g" (Indicator: Tare Symbol
). For example, place a bowl on the weighing platform, press the
thus set the scales to "0 g" again. This process can be repeated as often as you like until
the total capacity of the scales (5 kg) is reached. After removing the weighed item the total
weight will be displayed as a negative value (Indicator: Minus symbol
Automatic deactivation of sca les:
If the displayed weight does not change within approx. two minutes, the scales
automatically deactivate.

3. Error messages

"Lo" = Display battery empty – please replace the batteries with the battery type
intended for your scales (2 x 1.5V AAA).
"Err" = Overload indicator – max. capacity of scales (5 kg) has been exceeded.
Remove the load from the scales immediately; otherwise the load cell could
incur damage.

4. Technical Data

Weight-bearing capacity x division: Max. 5 kg x 1 g
Dimensions: 170 mm x 230 mm x 14 mm
Batteries: 2 x 1.5V AAA (contained in product package)
We reserve the right to make technical modifications in the course of further development.
5. Warranty
WAAGEN-SCHMITT agrees to rectify any material or manufacturing defects by offering
free repair or replacement, for a period of 3 years from the purchase date. In case of a
warranty claim, please return the scales to your dealer, including proof of purchase and
stating the reason for the claim.
Plea se note: Under extreme electromagnetic influences e.g. when operating a radio
device in immediate proximity to the scales, the indicator value may be affected. After the
disturbing influence has stopped, the product may once again be used as intended,
although a re-activation may be necessary.
/ZERO button and
).
3