Operation; Error Messages; Technical Data; Warranty - ADE KE 1502 Mila Bedienungsanleitung

Thank you for deciding to purchase this high-quality product from the WAAGEN-
SCHMITT Company. You have purchased a set of scales of the highest technical
standard and proven quality.
Please read through this operating manual carefully before starting-up the scales for the
first time, and keep it in a safe place so that this information is available to you when you
need it.
1. Start-up
Inserting the battery:
Open the battery compartment cover on the underside of the scales and insert the
provided batteries (2 x 1.5V AAA). Please be mindful of the correct polarity of the
batteries (+/-).
Safety information:
Please take care not to let any objects fall onto the scales,
otherwise the scales could be damaged.
Only clean the scales with a damp cloth. Do not use any solvents
or abrasive cleaning products. Do not immerse in water. All plastic
parts of the scales should be cleaned immediately after contact
with fat, spices, vinegar and other strongly seasoned and coloured
foodstuffs. Avoid contact with citric acid.

2. Operation

Activating the sca les:
Place the scales on a firm, even surface and press the
the display. After activation, all of the symbols will initially appear on the display; once the
scales have stabilised (indicator: stability symbol
depending on the setting:
0 g (weight indicator) / 0 ml (millilitres water) or
The scales are now ready for weighing. Always place the item to be weighed in the
middle of the scale, in order to obtain an accurate weighing result.
Plea se note: If a weight-value is shown after activation, press the
set the scales to zero.
Adjustmen t of the coun try-specific un it of weight:
A small push-button (UNIT) is located on the underside of the scales. By pressing the
UNIT button, you can – when necessary – adjust the country-specific unit of weight from
0 g = grams (metric) to 0:00 lb oz = pounds ounces (imperial).
Units of weight:
By pressing the MODE button on the left of the display, you can change the unit of
/ZERO button on the right of
) one of the following will appear,
0 ml (millilitres milk)
ZERO button, to
/
2
weight:
Grams Millilitres water
Please ensure that, during use, the scales are set to the unit of weight relevant to your
purposes.
Zeroing (tare) func tion:
By pressing the /ZERO button, you can set the scales to "0 g" (Indicator: Tare Symbol
). For example, place a bowl on the weighing platform, press the
thus set the scales to "0 g" again. This process can be repeated as often as you like until
the total capacity of the scales (5 kg) is reached. After removing the weighed item the total
weight will be displayed as a negative value (Indicator: Minus symbol
Automatic deactivation of sca les:
If the displayed weight does not change within approx. two minutes, the scales
automatically deactivate.

3. Error messages

"Lo" = Display battery empty – please replace the batteries with the battery type
intended for your scales (2 x 1.5V AAA).
"Err" = Overload indicator – max. capacity of scales (5 kg) has been exceeded.
Remove the load from the scales immediately; otherwise the load cell could
incur damage.

4. Technical Data

Weight-bearing capacity x division: Max. 5 kg x 1 g
Dimensions: 150 mm x 221 mm x 18 mm
Batteries: 2 x 1.5V AAA (contained in product package)
We reserve the right to make technical modifications in the course of further development.

5. Warranty

WAAGEN-SCHMITT agrees to rectify any material or manufacturing defects by offering
free repair or replacement, for a period of 3 years from the purchase date. In case of a
warranty claim, please return the scales to your dealer, including proof of purchase and
stating the reason for the claim.
Millilitres milk
/ZERO button and
).
3