Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operations:
1.
Plug in the unit to a socket. Make sure the power supply is same as rated.
2.
Press Switch to switch on the power. Heater is shifted to Standby mode. Power
Indicator Light(#18) starts flashing.
3.
Press Select button (#15) to turn on one or both heating elements as desired.
Indicator Light(#18) will light up accordingly.
4.
Press
(#17)button to shift the heater to Standby mode.
5.
Press Switch again to cut off the power totally.
Cleaning:
Unplug the unit before cleaning. It should be wiped with wet cloth. Do not use too
much water.
16
EN
Werbung
