ORFELD DX025A Bedienungsanleitung Seite 6

to another. Shorting the battery termi-
nals together may cause burns or a fire.
4. Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If con- tact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
5. Do not use a battery pack or tool that
is damaged or modified. Damaged
o r m o d i f i e d b a t t e r i e s m a y e x h i b i t
unpredictable behaviour resulting in fire,
explosion or risk of injury.
6. Do not expose a battery pack or tool
to fire or excessive temperature.
Exposure to fire or temperature above
130 °C may cause explosion.
7. Follow all charging instructions and
do not charge the battery pack or
tool outside the temperature range
specified in the instructions. Charging
improperly or at temperatures outside
the specified range may damage the
battery and increase the risk of fire.
Cordless driver drill safety warnings
1. Use auxiliary handle(s), if supplied
with the tool. Loss of control can cause
personal injury.
2. Hold power tool by insulated gripping
s u r f a c e s , w h e n p e r f o r m i n g a n
operation where the cutting accessory
may contact hidden wiring. Cutting
accessory contacting a "live" wire may
make exposed metal parts of the power
tool "live" and could give the operator an
electric shock.
3. Hold power tool by insulated gripping
s u r f a c e s , w h e n p e r f o r m i n g a n
operation where the fastener may
contact hidden wiring. Fasteners
contacting a "live" wire may make
exposed metal parts of the power tool
"live" and could give the operator an
electric shock.
4. Always be sure you have a firm
footing. Be sure no one is below when
using the tool in high locations.
5. Keep hands away from rotating parts.
6. Hold the tool firmly.
7. Do not leave the tool running. Operate
the tool only when hand-held.
8. Do not touch the drill bit or the
w o r k p i e c e i m m e d i a t e l y a f t e r
operation; they may be extremely hot
and could burn your skin.
9. Some material contains chemicals
which may be toxic. Take caution
to prevent dust inhalation and skin
contact. Follow material supplier
safety data.
10. If the drill bit cannot be loosened
even you open the jaws, use pliers to
pull it out. In such a case, pulling out
the drill bit by hand may result in injury
by its sharp edge.
SAVE THESE INSTRUCTIONS.
WARNING:
or familiarity with product (gained from
repeated use) replace strict adherence
to safety rules for the subject product.
MISUSE or failure to follow the safety
rules stated in this instruction manual
may cause serious personal injury.
Important safety instructions for battery
cartridge
1. Before using battery cartridge, read
all instruc- tions and cautionary
markings on (1) battery charger, (2)
battery, and (3) product using battery.
2. Do not disassemble battery cartridge.
3. I f o p e r a t i n g t i m e h a s b e c o m e
excessively shorter, stop operating
immediately. It may result in a risk of
overheating, possible burns and even
an explosion.
4. If electrolyte gets into your eyes,
rinse them out with clear water and
seek medical attention right away. It
may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with
any con- ductive material.
(2) Avoid storing battery cartridge in
a con- tainer with other metal objects
such as nails, coins, etc.
6
DO NOT let comfort