Niko Home Control Gebrauchsanleitung Seite 37

70
5 "Settings" tab options
Press the "settings" tab to display the settings menu.
5.1 "Control" submenu
A Press the "control" submenu to open the control settings menu.
This is where you can change the symbol linked to each location.
an overview will be displayed of all the locations entered in the
programming software by the installer. only eight locations can be
displayed per screen. if more than eight locations have been entered
in the programming software, go to the next screen using the arrow
on the right. Use the arrow on the left to return to the previous
screen.
Use the "back" button in the menu bar at the bottom to return to
the main settings menu.
B Select a location for which you wish to select a different symbol.
C Browse the list of available symbols by using the scroll bar to the
right. Press the symbol of your choice.
71