Niko Home Control Gebrauchsanleitung Seite 31

58
2 "Control" tab options
2.1 Press the "control" tab to display the control menu.
an overview will be displayed of all the locations entered in the
programming software by the installer. only eight locations can be
displayed per screen. if more than eight locations have been entered in
the programming software, go to the next screen using the arrow on the
right. Use the arrow on the left to return to the previous screen.
2.2 Select the location for which you wish to view the available actions.
The various actions have been named and entered in the programming
software by the installer. Depending on the settings, the following screen
may appear.
on the left of the screen, the location you selected is displayed.
Up to six actions are displayed per screen. You can browse the available
actions by moving up or down the list or by using the scroll bar to the
right.
2.3 Press the button of the action you wish to control. The various
actions are explained in more detail below.
2.4 Press "control" in the menu bar at the bottom of the screen, of press
"X" on the right of the screen to return to the overview of locations
within the home.
in the menu bar, press the tab of the menu you wish to view.
Select "home" to return to the start screen.
59