3M Digital Media System 800-Serie Bedienungsanleitung Seite 11

M Digital Media System 800 Series
™
Replacing�Projection�Lamp
1. Press the Standby/On button on the IR Controller. Wait for the fan motor
to cycle off.
2. Turn the main power switch on Control Panel to OFF and unplug the
projector power cord. Allow the projector to cool down for at least one
hour.
. Unscrew the Lamp Cover on the
side of the projector head, and
remove the cover.
4. Unscrew lamp retention screw.
© M 2006. All Rights Reserved.
Lamp Replacement
11