Kärcher MT 36 Bp Originalbetriebsanleitung Seite 15

c Do not expose power tools
to rain or wet conditions.
Water entering a power tool
will increase the risk of elec-
tric shock.
d Do not abuse the cord.
Never use the cord for car-
rying, pulling or unplug-
ging the power tool. Keep
cord away from heat, oil,
sharp edges or moving
parts. Damaged or entan-
gled cords increase the risk
of electric shock.
e When operating a power
tool outdoors, use an ex-
tension cord suitable for
outdoor use. Use of a cord
suitable for outdoor use re-
duces the risk of electric
shock.
f If operating a power tool in
a damp location is una-
voidable, use a residual
current device (RCD) pro-
tected supply. Use of an
RCD reduces the risk of
electric shock.
3 Personal safety
a Stay alert, watch what you
are doing and use com-
mon sense when operat-
ing a power tool. Do not
use a power tool while you
are tired or under the influ-
ence of drugs, alcohol or
medication. A moment of
inattention while operating
power tools may result in se-
rious personal injury.
b Use personal protective
equipment. Always wear
eye protection. Protective
equipment such as dust
mask, non-skid safety
shoes, hard hat, or hearing
protection used for appropri-
ate conditions will reduce
personal injuries.
c Prevent unintentional
starting. Ensure the
switch is in the off-posi-
tion before connecting to
power source and/or bat-
tery pack, picking up or
carrying the tool. Carrying
power tools with your finger
on the switch or energising
power tools that have the
switch on invites accidents.
d Remove any adjusting key
or wrench before turning
the power tool on. A
wrench or a key left attached
to a rotating part of the pow-
er tool may result in personal
injury.
e Do not overreach. Keep
proper footing and bal-
ance at all times. This ena-
bles better control of the
power tool in unexpected sit-
uations.
f Dress properly. Do not
wear loose clothing or
jewellery. Keep your hair,
clothing and gloves away
English 15