Panasonic CF-VHD Serie Bedienungsanleitung Seite 7

Windows 98
1 Turn your computer on.
2 At start up, press Ctrl to display the startup menu.
3 Select [Command prompt only].
4 Input the following command.
FDISK Enter
5 The message [Do you wish to enable large disk support (Y/N) ..... ?] will be dis-
played. Press Y and then press Enter .
6 When [FDISK Options] is displayed, enter 5 for [5. Change current fixed disk drive]
and then press Enter .
7 When [Change Current Fixed Disk Drive] is displayed, enter 2 for [Enter Fixed Disk
Drive Number (1-2)] and then press Enter .
8 When [FDISK Options] is displayed, enter 1 for [1. Create DOS partition or Logical
DOS Drive] and then press Enter .
9 When [Create DOS Partition or Logical DOS Drive] is displayed, enter 1 for [1.
Create Primary DOS Partition] and then press Enter .
10 When [Create Primary DOS Partition] is displayed, follow the on-screen instructions.
11 An indication to restart the computer will be displayed. Press Ctrl + Alt +
Delete .
The computer will restart.
12 Select [My Computer].
13 Click [D:] (or the drive letter of a newly created drive) with the right button
and select [Format].
14 Select [Full] for [Format type] and then select [Start].
15 At the confirmation message, select [OK].
Follow the on-screen instructions.
16 When the operation completes, be sure to select [Start] - [Shut Down] and restart the
computer before using the second hard disk.
17 If necessary, run SCANDISK to check the hard disk.
Windows NT
1 Turn your computer on.
Be sure to log on with the authority of an administrator.
2 Select [Disk Administrator] in [Start] - [Programs] - [Administrative Tools (Common)]
If the message [Configuration information about the missing disk(s) will be
retained] is displayed, select [OK].
3 The message [System configuration will now be updated] will be displayed. Select [OK].
If [Confirm] is displayed, select [Yes].
4 When [Disk Administrator] is displayed, click [Disk 1] with the right button and then
select [Create].
5 Specify the partition size and then select [OK].
If [Confirm] is displayed, select [Yes].
6 Close the [Disk Administrator].
E
7