Panasonic CF-VHD Serie Bedienungsanleitung Seite 6

First-time Operation
Windows 2000
1 Turn your computer on.
Be sure to log on with the authority of an administrator.
2 Select [Disk Management] in [Start] - [Settings] - [Control Panel] - [Administrative
Tools] - [Computer Management] - [Storage].
3 When [Welcome to the Write Signature and Upgrade Disk Wizard] is displayed,
select [Next].
4 At [Select Disk to Write Signature], add the check mark for [Disk 1] and select [Next].
5 At [Select Disks to Upgrade], remove the check mark for [Disk 1] and then select [Next].
6 Select [Finish].
7 Click the right side of [Disk 1] with the right button and select [Create Partition].
Follow the on-screen instructions.
8 Select [My Computer].
9 Click [D:] (or the drive letter of a newly created drive) with the right button
E
and select [Format].
If you select the FAT32 file-system format, the computer may not format a 30 GB
partition.
In this case, reduce the size of the partition.
10 Select [Start].
11 When the operation completes, be sure to select [Start] - [Shut Down] and restart the
computer before using the second hard disk.
Windows XP
1 Turn your computer on.
Be sure to log on with the authority of an administrator.
2 Select [Disk Management] in [Start] - [Control Panel] - [Performance and Mainte-
nance] - [Administrative Tools] - [Computer Management] - [Storage].
3 When [Welcome to the Initialize and Convert Disk Wizard] is displayed, select [Next].
4 At [Select Disks to Initialize], add the check mark for [Disk 1] and select [Next].
5 At [Select Disks to Convert], remove the check mark for [Disk 1] and then select [Next].
6 Select [Finish].
7 Click the right side of [Disk 1] with the right button and select [New Partition].
Follow the on-screen instructions.
8 Select [Start] - [My Computer].
9 Click [D:] (or the drive letter of a newly created drive) with the right button
and select [Format].
If you select the FAT32 file-system format, the computer may not format a 30 GB
partition.
In this case, reduce the size of the partition.
10 Select [Start].
11 When the operation completes, be sure to select [Start] - [Turn Off Computer] and
restart the computer before using the second hard disk.
6