Reverse Operation - Westfalia Power-Profi Bedienungsanleitung

Operating
Make sure the ON/OFF switch is in the position O before plugging in
the power cord. Insert the power plug into the socket.
1. To switch on the unit place the main switch (14) in the position I
for forward running. Then turn the rotary switch (8) to the right.
2. Push the food only with the pusher (26) into the filling tube (2).

Reverse Operation

1. Use this function if the cutter housing is blocked or clocked.
Attention: Wait until the motor has come to standstill before set-
ting to reverse running.
2. If the blocking cannot be released at all, switch off the appliance.
Pull the power plug, disassemble the cutter housing and clean it
thoroughly.
Hints:
Allow the appliance to make 4 – 5 turns without food, so remaining
food can fall into the collecting bowl.
After work switch off the appliance and pull the power plug.
Please note, the grinding disc might get stuck onto the worm shaft
and cannot be removed easily. To remove the grinding disc, use a
suitable and clean object and lift up the grinding disc from the worm
shaft.
Operating
50