Sony SDM-N50PS Bedienungsanleitung Seite 7

Media engine
SYSTEM CONNECTER
( TO DISPLAY )
INPUT 1
AUDIO IN
INPUT 2
qs qs AUDIO IN jack (page 10) qs qs
This jack inputs audio signals when connecting to the audio
output jack of the computer or other audio equipment.
qd SYSTEM CONNECTOR (TO DISPLAY) (page 8) qd
qd qd
This connector outputs signals to the display when the display
and the media engine are connected with a system connecting
cable.
qf HD15 (RGB) input 1 connector (INPUT1) (page 8) qf
qf qf
This connector inputs RGB video signals (0.700 Vp-p,
positive) and SYNC signals.
5 4 3 2 1
10 9
15 14 13
Pin No. Signal
1 Red
2 Green
(Sync on Green)
3 Blue
4 ID (Ground)
5 DDC Ground*
6 Red Ground
7 Green Ground
8 Blue Ground
9 DDC + 5V*
10 Ground
11 ID (Ground)
12 Bi-Directional Data (SDA)*
13 H. Sync
14 V. Sync
15 Data Clock (SCL)*
* DDC (Display Data Channel) is a standard of VESA.
8 7 6
12 11
qg HD15 (RGB) input 2 connector (INPUT2) (page 8) qg qg qg
This connector inputs RGB video signals (0.700 Vp-p,
positive) and SYNC signals. The pin assignment is the same
as qf.
qh qh AC IN connector (page 9) qh qh
This connector provides AC power to the monitor.
qj qj AC power switch (page 9)
qj qj
This switch turns the media engine on and off. When the AC
power switch is turned on or off, the display automatically
turns on or off.
qk qk AC power indicator (page 17)
qk qk
This indicator lights up in green when the media engine is
turned on. The indicator lights up in red when the display is
turned off with the media engine on. The indicator lights up in
orange when the monitor is in the power saving mode.
ql ql Media engine stand ql ql
This stand is used to install the media engine vertically.
Caution
Be sure to install the media engine vertically shown as left. Installing the
media engine lying flat may block ventilation, and may cause a
malfunction.
GB
7