Herunterladen Inhalt Inhalt Diese Seite drucken

General Description; Installation - Elkron AS500/RPT Bedienungsanleitung

Zusätzliches netzteil mit verstärker
Vorschau ausblenden Andere Handbücher für AS500/RPT:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ENGLISH
WARNING: In this document, just a number of basic indications on the product are present
For further detailed information, refer to MP500 control panel manuals.

GENERAL DESCRIPTION

AS500 additional power supply unit is an optional device of MP500/8 and MP500/8 control panel.
AS500 unit is provided with an electronic board integrating inside itself an EP508 type expansion
that is directly connected to control panel BUS, a repeater module to extend control panel BUS
length and an additional power supply unit able to feed devices connected to the system.
The AS500 unit is provided with:
• 8 inputs;
• 1 balanced SAB input;
• 3 outputs (1 relay output and two electric outputs);
• 1 switching power unit;
• battery housing;
• housing for two expansions.

INSTALLATION

F
Locate tamper in position A or S, depending on the type of desired application:
in position A, just for protection against opening
in position S, for protection against opening and burglary, in this case using the screw with a
plug to support the contact.
Connect the tamper connection to the board in both cases.
8
Downloaded from
www.Manualslib.com
D
T
F
manuals search engine
T Wall fixing holes
D Fixing holes for 2 optional EP508 expansions
F Strip fixing ring for power supply cable
AS500/RPT

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis