Configurations; Configuring Various Functions; Changing The Brightness Of The Indicators (Dimmer); Configuring The Hdmi Control Function - Yamaha ESB-1080 Bedienungsanleitung

CONFIGURATIONS

Configuring various functions

Changing the brightness of the indicators
(DIMMER)
Change the brightness of the indicators on the unit.
Each time DIMMER is pressed, the brightness of the indicators
changes as follows.
Dim (default setting) Off Bright
Indicators glow brightly just after operation and change to the
specified brightness after a few seconds.

Configuring the HDMI control function

Enable or disable the unit's HDMI control function (link function).
This function coordinates TV and unit operation so that the unit can
be operated using the TV's remote control.
This function is enabled by default.
1
Dim ...
37
2
The HDMI control function is enabled or disabled, and
the unit turns on. The indicator shows HDMI control
function status for several seconds immediately after the
unit is turned on.
En
Glows (enabled; default)
Off (disabled)