Cleaning; Faults And Remedial Measures; Disposal; Technical Data - Euromate 107446 Originalbetriebsanleitung

GB
– Switch the device off again by pulling once at the
highest heat level.

Cleaning

DANGER! Risk of injury! Before all work
on the device, always disconnect the mains
plug.
– Switch off the device and let it cool off completely.
– Pull out the plug.
– Wipe the device with a slightly damp cloth.
– To clean the heat rods (1) and reflector, use a
brush with long, soft bristles.
Fault/malfunction
Device does not heat
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.

Disposal

Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. Information on returning these items is
available from the seller. Sellers are required to
accept these items free of charge.

Technical data

Item number
Nominal voltage
Nominal output
Switch levels
Protection type
Information requirements for electric local space heaters
Model identifier(s):
Item Symbol
Heat output
Nominal heat output P
Minimum heat out- P
put (indicative)
Maximum continu- P
ous heat output
Auxiliary electricity consumption
At nominal heat out- el
put
At minimum heat el
output
10
Cause
Is the device switched off?
No mains voltage?
107446
230 V~, 50 Hz
1200 W
600 W
1200 W
IP24
Value Unit
1,2 kW
nom
0,0 kW
min
1,2 kW
max,c
N/A kW
max
N/A kW
min

Faults and remedial measures

When something isn't working...
DANGER! Risk of injury! Improperly per-
formed repairs can lead to the device not
functioning safely. This endangers yourself
and your environment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possi-
bly money too.
Remedial measure
Set the desired heat level.
Check cable, plug, socket and fuse.
Batteries and rechargeable batteries, which
are not permanently installed in waste elec-
trical devices, must be removed prior to dis-
posal and must be disposed of separately.
Lithium batteries and battery packs in all systems
must only be retuned to a collection point when dis-
charged. Batteries must always be protected against
short circuits by covering the poles with adhesive
tape.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for
recycling.
107446
Item
Type of heat input, for electric storage local
space heaters only
manual heat charge control, with integrated
thermostat
manual heat charge control with room and/
or outdoor temperature feedback
electronic heat charge control with room
and/or outdoor temperature feedback
fan assisted heat output
Type of heat output/room temperature control
single stage heat output and no room tem-
perature control
Unit
no
no
no
no
no