Canceling A Trekstor; Bound To A Combination - trekstop DataStation maxi z.ul Handbuch

4.4) Mounting a bound TrekStor
DataStation maxi z.ul
• To mount a
DataStation maxi z.ul
the primary
• The secondary
mounted as soon as the primary one is mounted.
Note: You can only mount the primary
and thus the combination – if you have also registered the secondary
DataStation maxi z.ul
4.5) Canceling a TrekStor
to a combination
Note: To unbind a combination, it must be unmounted from all PCs.
NOTE: Back up all data before canceling a coupling. When uncoupling, ALL
data on ALL associated hard disks is irrevocably lost.
DataStation maxi z.ul
• Secondary
unmounted as soon as the primary
unmounted.
Note: For more information on unmounting the
maxi z.ul
, please read section 3.7 "u
• Open the TrekStor NDAS Bind Management on a PC on which all
DataStation maxi z.ul
• Select the combination of the bound
and click on "u
will be unbound into unmounted
The unbound
TrekStor NDAS Device Management.
• Before you can use the unbound
DataStation maxi z.ul
again, all
mounted and formatted. Please also read sections 3.4 "m
t s d s
rek tor AtA tAtion mAxi z
. " on this topic.
mAxi z ul
DataStation maxi z.ul
DataStation maxi z.ul
". All associated
nbind
DataStation maxi z.ul
. " and 5.2 "f
ul
DataStation maxi z.ul
bound to a combination,
must be mounted.
is automatically
DataStation maxi z.ul
on your PC.
are automatically
DataStation maxi z.ul
DataStation
t s
nmounting the rek
of the combination are registered.
DataStation maxi z.ul
DataStation maxi z.ul
DataStation maxi z.ul
are also visible in the
DataStation maxi z.ul
must be individually
ormAtting the
– 47 –
bound
D s .
tor AtA tAtion mAxi z
.
ounting the
t s d s
rek tor AtA tAtion
–
is
".
ul
EN