Datastation; To A Pc Via Usb; The Ndas Network Technology - trekstop DataStation maxi z.ul Handbuch

1) USB mode: Connecting the TrekStor
maxi z.ul
Procedure using Windows® ME / 2000 / XP / Vista and Mac® OS X
from version 10.3
Note for users of Windows® ME, 2000, XP, Vista, Mac® OS X from version 10.3:
Drivers are not necessary for these operating systems. If you use Windows®
2000, make sure that you have installed at least service pack 4, and Windows®
XP requires service pack 2 or above.
• Insert the provided power supply into an electrical outlet, and connect
the cable to the "P
maxi z.ul
.
DataStation maxi z.ul
• Connect the
DataStation maxi z.ul
• Turn on the
• Your operating system will add the
a "l d " ("l
oCAl isk
2) Network mode: Connect the TrekStor
DataStation maxi z.ul
the network.
2.1) The NDAS network technology
The network connection is based on NDAS technology. NDAS (Network
Direct Attached Storage) is a patented technology from XIMETA, which
allows digital media to be integrated directly into the network. Neither a
server nor an IP address or the TCP/IP protocol is required for this direct
connection; the NDAS device software simply needs to be installed.
All users who have installed the NDAS device software can directly control
and use mounted devices (i.e. devices integrated into the system). In this
case, " " means that the installed NDAS devices are integrated into
direCt
"m C " and displayed there as the local hard disk.
y omPuter
to a PC via USB
" connection of the
ower
d ") under "m
oCAl rive
– 33 –

DataStation

DataStation
to a USB port of your PC.
.
DataStation maxi z.ul
C " / "C
y omPuter omPuter
to one or more PCs via
as
".
EN