Westfalia 80 31 79 Bedienungsanleitung Seite 35

1. Carefully
forwards.
2. Mount the lower part of the push bar
(18) with the screws (VIII) and the
corresponding nuts (VII) on the bottom
side of the snow thrower.
3. Now mount the upper part of the push
bar (18) with the included wing screws
(11) and the M8x40 mm screws (XI).
4. Securely tighten all screws and nuts
as well as the wings nuts.
5. Mount the cable pull (16) with the
adjusting sleeve and tighten the sleeve
with the lock nut.
Assembly and Operation
tilt the snow thrower
31
Crank Arrangement
Eyelet