Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Checking The Belt
EN
After the Intenza Treadmill has been installed and stabilised, the belt must be checked to
confirm proper tracking.
Firstly, ensure the power cord is plugged into a suitable outlet. And secondly, turn on the treadmill. Stand on the side landing of the
treadmill and straddle the belt. To start the belt, press the 4mph button. If the striding belt appears off—centre, please refer to section
How To Align The Running Belt.
CENTERED
OFF—CENTERED
Power Switch
The power switch is located on the front panel at the base of Intenza Treadmill.
The ON/OFF switch has 2 positions:
"
" represents ON and "
" represents OFF.
Intenza Treadmills Handbook. Setup: Checking The Belt And Power Switch
15
Werbung
Inhaltsverzeichnis
