Installation; Weighing Food - Ernesto retro EKWR 5 A1 Bedienungsanleitung

Installation

1. Place the scale on a flat and stable surface.
2. Remove the two screws
screwdriver.
3. Place the cradle
screws
cradle
4. Push the screws
onto them from below (see fold-out page).
5. Place the weighing bowl
NOTE
► The appliance may only be used when fully assembled.

Weighing food

CAUTION – PROPERTY DAMAGE!
► Do not load the scale with more than 5 kg. The scale could be irreparably
damaged.
1. If you have not done this already: place the weighing bowl
cradle
2. Turn the zero setting wheel
3. Place the food in the weighing bowl
The pointer
–
Read the outer digits on the scale
–
Read the inner digits on the scale
ounces (oz).
EKWR 5 A1
from the cradle
on the weighing mechanism so that the holes for the
are arranged one above the other and the bent arms of the
are pointing upwards.
through the holes in the cradle
onto the cradle
.
until the pointer
shows the weight on the scale
using a spanner and a
and screw the nuts
.
points to zero.
.
.
for the weight in kilograms/grams.
for the weight in pounds (lb)/
GB
IE
on the
5