Filter Replacement - Schwamborn STS 130 Gebrauchs- Und Wartungshandbuch

14. FILTER REPLACEMENT

14.1 PRIMARY FILTER REPLACEMENT (HEPA)
1. Loose the three clamps (A) and remove the top cover (B).
2. Remove the filter (C).
3. Replace the filter (C).
4. Insert the new filter (C).
5. Fit the top cover (B) and fasten with the three clamps (A).
14.2 SECONDARY FILTER REPLACEMENT (HEPA D.O.P.)
1. Remove the rubber sleeve (D).
2. If necessary close the filter (E).
3. Remove the three screws (F).
4. Remove the filter (G).
5. Replace the filter (G).
6. Insert the new filter (G).
7. Attach the filter to the filter chamber with the three screws (F).
8. Install the rubber sleeve (D).
B
C
A
D
F
E
G