Schwamborn STS 130 Gebrauchs- Und Wartungshandbuch Seite 23

18. REPLACE LONGBAG
1.
Remove the tension belt.
3.
Insert the new Longbag with
the inner part facing
upwards.
7.
Insert the container with the Longbag,
using the pins as a reference
4.
Cut and remove the
closing bands.
8.
Bring the inside of the
Longbag up to the height of
the belt positioning. Close the
bag around the chamber with
the tension belt.
2.
Remove the holder with the remaining Longbag.
5.
Keep the inner part of the
bag outside the container
and pull it slightly.
6.
Pull the outer part of the
Longbag to create the new bag.
9.
Pull the Longbag and place
the stripes at the end to
make a new bag.
If necessary, use two cable
ties.