Filter Replacement - Schwamborn STS 260A Gebrauchs- Und Wartungsanleitung

14. FILTER REPLACEMENT

14.1 PRIMARY FILTER REPLACEMENT (HEPA)
1. Remove the suction unit (A) from the filter chamber.
2. Remove the filter protection (B) (loosen screws) .
3. Remove the star knob, spring and washer (C).
4. Remove the filter.
5. Install the new filter according to the label (D) on the bottom.
• The rubber side of the washer abuts the filter body.
• Spring
• Star knob
6. Install the filter protection (B) (tighten screws).
7. Insert the suction unit (A) into the filter chamber.
B
C
A
D