Filter Replacement - Schwamborn STS 750 Gebrauchs- Und Wartungshandbuch

14. FILTER REPLACEMENT

C
1. Remove the suction unit (A) from the filter chamber
2. Remove the star knob, spring and washer (C).
3. Remove the filter protection (B) (loosen screws).
4. Replace the filter, making sure that it is intact and that the seal (G)
is present.
5. Install the new filter according to the label (D) on the bottom.
• The rubber side of the washer abuts the filter body.
• Spring
• Star knob
6. Install the filter protection (B) (tighten screws).
7. Insert the suction unit (A) into the filter chamber.
B
A
G
D