Installation & Mounting - True Systems P-Solo Ribbon Bedienungsanleitung

INSTALLATION & MOUNTING
INSTALLATION
Unpacking and Inspection
We recommend that you inspect your
P-SOLO
from the factory shipping carton. In the
unlikely event that the unit exhibits any
physical damage, DO NOT connect it
to the AC mains power, but contact
your dealer immediately.
In addition to the P-SOLO
shipping carton should also include:
• AC power cord
• Operation Manual
• Warranty registration card
We recommend that you keep the
shipping carton and foam inserts in the
event that the unit must be shipped
at some time in the future. DO NOT
package the unit in "packing peanuts"
or similar material as it will settle dur-
ing shipping and damage may occur.
If original packing materials cannot
be located, wrap the unit with plastic
"bubble wrap" material extending at
least 2" beyond the extremities of the
P-SOLO
TRUE systems
Downloaded from www.Manualslib.com
upon unpacking it
enclosure.
manuals search engine
22
MOUNTING
The P-SOLO
placement on your desktop, or any
convenient flat surface. It's light weight
and compact enclosure make it easy to
carry by hand or in your gig bag.
• Do not locate the unit where it is
exposed to rain, moisture, or liquid
spills.
, the • Do not locate the unit where it is
exposed to temperature extremes.
• Avoid locating the unit next to
equipment that emits strong elec-
tromagnetic fields.
• Avoid using mic, output, or instru-
ment cables that are too short.
While the P-SOLO
stable for its size and shape, step-
ping or pulling on a short, taught
cable may move it out of place,
possibly causing damage.
SOLO
is designed for
is quite