ION Stereo LP Schnellstartanleitung Seite 4

Using Stereo LP
Playback
There are 3 ways to listen to your vinyl records with Stereo LP:
1. You can simply listen to your music using Stereo LP's internal speakers.
2. If you prefer to use your own stereo speakers, you can connect Stereo LP's RCA outputs to a stereo
system or to powered speakers. Do not connect them to phono-level inputs; Stereo LP's RCA outputs
are line-level and could damage a device with phono-level inputs. (Any other standard input type, such
as CD, Aux In, or Tape is acceptable).
3. You can listen through your computer speakers or with headphones connected to your computer, once
your computer soundcard's input device has been set to USB PnP Audio Device or USB Audio Device,
depending on your Windows operating system (USB PnP Audio Device on Mac OS X) and that you are
record-monitoring the audio using EZ Vinyl/Tape Converter or similar software (Stereo LP cannot be
used as a playback device for your computer's audio.). See the section Setting Your Computer's
Soundcard as the Default Playback Device for details on how to configure sound playback.
Recording
To record music to your computer, you can use ION EZ
Vinyl/Tape Converter. EZ Vinyl/Tape Converter makes it easy
to turn your music into digital files. After you finish converting
your vinyl, you can then burn to CD or load onto portable
media devices.
Follow the instructions on the included software download
card for installing EZ Vinyl/Tape Converter.
1. With EZ Vinyl/Tape Converter installed on your computer, use the included USB cable to connect
Stereo LP's USB port to an available USB port on your computer.
On your computer, you can open EZ Vinyl/Tape Converter by going to Start Menu  All Programs
2.
(Windows) or the Applications menu (Mac).
3. Follow the on-screen instructions to set up your recording. When prompted to play your music, move
Stereo LP's tonearm over the record to start playback.
Note: To listen to a record while it's playing, listen through your computer's speakers, or connect
Stereo LP's RCA outputs to a stereo system or powered speakers. Stereo LP must be connected to
the computer in order for EZ Vinyl/Tape Converter to advance to the next step.
4. When you have finished recording, raise Stereo LP's tonearm from the record and return it to its arm
clip.
4
Downloaded from www.Manualslib.com manuals search engine
Visit ionaudio.com/ezvc to download
the latest version of EZ Vinyl/Tape
Converter software or for helpful
troubleshooting guide and additional
support.