Gastros InductWarm 130 Betriebs- Und Montageanleitung Seite 19

Operation
The four power levels of the InductWarm
only. The actual temperature depends on: material of the dish, surrounding temperature, size of the dish and the
positioning above the coil.
The InductWarm
inductive dish on top. When the InductWarm
will be removed, the InductWarm
indicated by four blinking LEDs. If the dish will be replaced within five minutes the system starts warming on the
same level as before, after that the systems will switch to standby mode. The InductWarm
induction capable dishes.
Connecting cable
Only connect three InductWarm
with one 230V power outlet.
Voltage range
Maximum input power
Electrical fuse protection
Frequency
Dimensions
Connection
Downloaded from www.Manualslib.com
130 cover different warming levels. The temperature levels are indications
®
130 has a dish detection. This ensures that the induction field is only active when placing an
®
130 system recognizes the situation and turns off automatically. This is being
®
130 device with one 48 cm connecting cable. Then it is possible to supply this three devices
®
1
Technical Information of the InductWarm
manuals search engine
LED 1-4
130 is operating with a dish, the small LEDs are shining. If the dish
®
8
® 130 Built-in Element
220 – 240 V AC
750 W
10 A
50 Hz
350 x 350 x 110 mm
C13
Infra Red Receiver
Power Button
130 can be used wih any
®
19