Operating Status Display - Oase InScenio EGC Controller Gebrauchsanleitung

Operating status display

LED colour
–
Green
Yellow
Red
Installing the OASE app "Easy Control"
How to proceed:
1. Open the app "App Store" or "Google Play" on your
smartphone/tablet.
2. Search for the OASE app ʺEasy Controlʺ.
3. Install the app.
– Follow the instructions during installation.
 The app symbol appears on the display after successful installation.
22
LED status Description
Off InScenio EGC Controller is switched off.
Lit InScenio EGC Controller is ready for operation and in access
point mode.
Flashing fast WPS is activated, InScenio EGC Controller is waiting for the
router access data.
Flashing slowly InScenio EGC Controller is ready for operation and connected
(2 seconds on, to the router.
1 second off)
Lit InScenio EGC Controller is starting up or is in update mode.
Flashing fast Firmware update in progress
Flashing slowly InScenio EGC Controller is searching for a connection to the
(2 seconds on, router.
1 second off)
Flashing Malfunction
Remedy:
• Disconnect from the power supply. Wait for 10 seconds
• Reset InScenio EGC Controller to factory settings
• Carry out a firmware update
then reconnect.
iOS Android