Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
c) Keypad
Button
Description
Power on/off.
Toggle between FCL (B) and TCL (C) mode.
Zero calibration.
In RECALL mode (G), browse records.
Store the current reading.
Press and hold for 3 seconds to enter RECALL mode (G).
8. Replacing Batteries
Stored readings will not be lost when batteries are replaced or run out. Replace
batteries if the low battery symbol
Remove the battery compartment (1) screws using a plus-head screwdriver
•
•
Insert the batteries matching polarities as shown inside the compartment.
•
Replace the compartment cover and fasten the screws.
To preserve battery life, meter will automatically shut down after 10 minutes of no
activity. Press
to turn the meter back on.
shows.
23
Werbung
Kapitel
Inhaltsverzeichnis
