Ayce GG6380E Originalbetriebsanleitung Seite 57

Using your generator
Starting the engine
1. Remove all connections from the AC sockets.
2. Set the breaker to the "OFF" position.
3. Turn the fuel supply valve to the "ON" position.
position. If the generator is warm skip this step.
Turn the key to the "START" position fill the generator starts, then release.
6. Recoil Start
Pull the starting handle lightly until you start to feel resistance and then pull up
sharply to start the generator.
NOTE: You may have to do this more than once.
WARNING: ONCE THE GENERATOR HAS STARTED, RELEASE THE STARTING
7. Once the engine has warmed up, set the choke lever to the "START" position.
112 113 GB