Samsung POWERbot SR1 M70 Serie Kurzanleitung Seite 13

6
-2
Brush and Auto shutter tool
Brush design may differ depending on the model. Do not clean the brush with water.
1
Remove the
brush cover
5 Reassemble the brush
✻ ✻ If a brush or brush cover is not assembled correctly after the maintenance work, scratches may occur
on the floor, or product malfunction may occur. Therefore, assemble them correctly by referring to the
cleaning and maintaining section of a user manual.
Information codes
[SR1*M701*** series]
✻ ✻ Refer to the user manual for steps to take for each information code on the display panel.
Information codes animation
[SR1*M702***, SR1*M703***, SR2*M70**** series]
✻ ✻ Refer to the user manual for steps to take for each Information code with
Cleaning and maintaining
You must turn off the emergency switch before cleaning POWERbot.
2
Remove the
brush
English-13
3
Clean the brush
6 Reassemble the brush cover
Information codes
mark on the display panel.
4
Clean the auto
shutter tool