Safety Warnings - Makita EM403MP Originalbetriebsanleitung

EC Declaration of Conformity
For European countries only
We as the manufacturers: Makita Europe N.V., Business
address: Jan-Baptist Vinkstraat 2 3070 Kortenberg
BELGIUM. Authorize Yasushi Fukaya for the compilation
of the technical file and declare under our sole responsibil-
ity that the product(s); Designation: Brushcutter & String
Trimmer Attachment / String Trimmer Attachment.
Designation of Type(s): EM404MP / EM406MP.
Fulfills all the relevant provisions of 2006/42/EC and
also fulfills all the relevant provisions of the following
EC/EU Directives: 2000/14/EC and are manufactured in
accordance with the following Harmonised Standards:
EN ISO 11806-1:2011, EN 50636-2-91:2014.
Place and date of declaration: Kortenberg, Belgium. 30.6.2017
Responsible person: Yasushi Fukaya, Director -
Makita Europe N.V.

SAFETY WARNINGS

Brushcutter safety warnings
WARNING:
Read all safety warnings,
instructions, illustrations and specifications pro-
vided with this machine. Failure to follow all instruc-
tions listed below may result in fire and/or serious
injury to the operator and/or bystanders.
Save all warnings and instruc-
tions for future reference.
The term "brushcutter" and "machine" in the warnings
and precautions refer to the combination of the attach-
ment and the power unit.
The term "motor" in the warnings and precautions refers
to the engine or electric motor of the power unit.
General safety
1. First-time or inexperienced operator should
ask the dealer for training in all operation of the
machine. Never allow children, persons with
reduced physical, sensory or mental capabilities or
lack of experience and knowledge or people unfa-
miliar with the instructions to use the machine.
2. It is recommended only to lend the machine
to people who have proven to be experienced.
Always hand over the instruction manual.
3. Stay alert, watch what you are doing and use
common sense when operating the machine.
Do not use the machine while you are tired, ill,
or under the influence of drugs, alcohol or med-
ication. A moment of inattention while operating
the machine may result in serious personal injury.
4. Avoid using the machine in bad weather condi-
tions especially when there is a risk of lightning.
Follow your national and local regulation for
5.
use of outdoor power machines.
Intended use of machine
This machine is only intended for cutting grass, weeds,
bushes and undergrowth. Never use the machine for
any other purpose such as edging or hedge cutting.
Use for unintended purpose may result in serious injury.
Personal protective equipment
1. Always wear heavy, long pants, sturdy boots,
gloves, and a long-sleeve shirt. Do not wear loose
clothing, jewelry, short pants, sandals, or go bare-
foot. Secure hair so it is above shoulder level.
2. Always wear a helmet where there is a risk of
falling objects.
3. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer's responsibility to enforce
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.
4. Always wear ear protection, such as ear muffs.
Exposure to noise can cause hearing loss.
5. Always wear sturdy shoes with a non-slip
sole. This protects your feet against injuries and
ensures a good footing.
Preparation before use
1. Before use, always check the machine is safe
for operation:
— Check for fuel leaks.
— Make sure all fasteners are in place and secure.
— Replace damaged parts.
— Make sure the cutting tool is properly
installed and securely fastened.
— Make sure the cutting tool guard is prop-
erly attached in the position as described
in this manual.
— Check the throttle trigger, lock-off lever
and other control switch for smooth
action and proper function.
— Clean the handles for proper control of
the machine.
Make sure the handles are installed as
—
described in this manual.
Failure to follow those instruction may cause serious injury.
11 ENGLISH