Herunterladen Inhalt Inhalt Diese Seite drucken

Deleting Old Pairings; Adjusting The Volume - AKE BT-HC4 Handbuch

Bluetooth helmet connector
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

stereo mode, and then turn off the helmet.
Press the control button of the
LEDs flash alternately and pair the driver's helmet. Then you can turn on the
pillion's helmet again.
Now shortly press the button of the AKE Bluetooth helmet connector to
switch between the operating modes: a) driver's helmet in duplex talk mode
(for mobile phone / CB-radio via motorcycle intercom respectively
Boom!Box ) or b) both helmets in stereo mode.

Deleting old pairings

We recommend to generally delete old pairings! Bring the respective
AKE
Bluetooth Helmet Connector into pairing mode by turning it off and
on with the Bluetooth control button. Hold down the button when switching
on until the pairing mode is signaled by alternate blinking of the LEDs.
Then shortly press the button thrice. When all pairings have been deleted,
the device will switch off automatically. When the Helmet Connector is
tuned back on it will automatically enter pairing mode.
Establish the Bluetooth connection to the helmet
If your Bluetooth helmet allows this, the devices connect automatically
after switching on the power supply.
LED-indication:
Fast alternate red and blue blinking: Pairing mode
Red blinking: Searching partner or partner is out of range
Each 1 brief short blue blinking: Duplex connection enabled
Each 2 brief short blue blinking: Stereo connection enabled
Control tone for duplex/stereo communication: Depending on helmet set
It is always possible to switch between duplex and stereo transmission by
shortly pressing the multifunction button (5), longer pressing switches the
AKE Bluetooth helmet connector off.
Please note, it's necessary to switch to Duplex transmission, if the intercom is
requested. The setting will be saved.
Depending on the helmet set, it may happen, that the LED blinks blue
but the speech connection is not activated yet, then please activate
speech connection manually with two button clicks.

Adjusting the volume

TThe usually useful side tone itself of many motorcycle intercom systems
(you hear yourself speaking) is delayed transmitted in some Bluetooth
AKE
Bluetooth Helmet Connector until the
15

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bt-hc4 pro

Inhaltsverzeichnis