IDENTIFICATION OF PARTS
Decoration Cover
1
3
Blade Nut
5
Grill Ring
7
Grill Ring Buckle
9
Back Grill
11
Power cord
13
Column Tube
15
Pipe Screw
INSTALLATION
1.
Open the package and take out the products, make sure all
components are included, IM, remote control, etc.
Front grill
2
4
Fan Blade
6
Screw
8
Grill Nut
10
Fan body
12
Adjustment screw
14
Base
Install the fan according to below instructions.
2.
Figure 1
1)
Put the column tube through the hole of base and fix them
tightly by pipe screw (Figure 1).
2)
Put the fan body on to the column tube, and fix by the
adjustment screw (Figure2).
Figure 3
3)
Amount the rear grill to the front cover of motor, and align
the 3 positioning point to the holes on grill, finally fix by grill
nut.(Figure 3)
4)
Fit the fan blade on the motor axel, tightly fixing by blade
screw in crosswise (Figure4).
72 | 73
Figure 2
Figure 4
GB