After download:
Windows
®
1.
Double-click on "xxxxx.exe"
2.
The installer program will run automatically
3.
Follow the instructions and finish the driver installation
4.
Restart the Windows
5.
Connect the adapter to a USB port on the PC
6.
The IB-AA501 is ready to be used
macOS
®
1.
Run the file xxxxx.dmg by double click
2.
The installer program will run automatically
3.
Follow the instructions and finish the driver installation
4.
Restart the mac
5.
Connect the adapter to a USB port on the mac
6.
The IB-AA501 is ready to be used
•
Connect the USB 3.0 Type-A male port of this product to the computers USB
3.0 Type-A interface
•
Connect RJ45 female port of this item to your network periphery via Cat
cable (not included). At least a Cat6 Ethernet cable is recommended
Connection Diagram
System requirements and information
• Host computer with an available USB 3.0 Type-A port
• Installed Realtek driver-software
• RJ45 enabled network periphery with cable as needed (not included)
• One of the following operating systems: Windows
Windows RT or Android)
Manual IB-AA501
computer
®
computer
®
®
, macOS
(does not support
®
®