Safety information Please read carefully the following information to prevent injuries, damage to material and device as well as data loss: Warning levels Signal words and safety codes indicate the warning level and provide immediate information in terms of the probability of occurrence as well as the type and severity of the consequences if the measures to prevent hazards are not complied with.
Seite 3
Safety information 3. Hazards caused by a development of heat Insufficient device/power unit ventilation IMPORTANT Overheating and failure of the device/power unit • Prevent externally heating up components and ensure an exchange of air • Do not cover the fan outlet and passive cooling elements •...
Seite 4
Safety information 5. Potential data loss Data lost during commissioning IMPORTANT Potentially irreversible data loss • Always comply with the information in the operating instructions/quick installation guide • Exclusively use the product once the specifications have been met • Back up data prior to commissioning •...
Sicherheitshinweise Zur Vermeidung körperlicher Schäden, sowie von Sach-, Geräteschäden und Datenverlust beachten Sie bitte folgende Hinweise: Warnstufen Signalwort und Sicherheitszeichen kennzeichnen die Warnstufe und geben einen sofortigen Hinweis auf aWahrscheinlichkeit, Art und Schwere der Folgen, wenn die Maßnahmen zur Vermeidung der Gefahr nicht befolgt werden. warnt vor einer unmittelbar gefährlichen Situation, die GEFAHR zum Tod oder zu schweren Verletzungen führen wird.
Seite 6
Sicherheitshinweise 2. Gefahren während Montage (wenn vorgesehen) Scharfkantige Bauteile VORSICHT Finger- oder Handverletzungen bei Zusammenbau (wenn vorgesehen) möglich • vor Montage, Betriebsanleitung lesen • Kontakt mit scharfen Kanten oder spitzen Bauteilen vermeiden • Bauteile nicht mit Gewalt zusammensetzen • geeignetes Werkzeug verwenden •...
Seite 7
Sicherheitshinweise 6. Reinigung des Gerätes Schädigende Reinigungsmittel ACHTUNG Kratzer, Farbveränderungen, Feuchteschäden oder Kurzschluss am Gerät • vor Reinigung, das Gerät außer Betrieb nehmen • aggressive bzw. scharfe Reinigungs- und Lösungsmittel sind ungeeignet • nach der Reinigung sicherstellen, dass keine Restfeuchtigkeit vorhanden ist •...
Seite 8
DisplayPort™ to HDMI®, impossible in the past! Luckily enough, the past is the past! The IB-AA508 DisplayPort™ to HDMI® adapter connects DisplayPort™ outputs, such as a laptop or desktop PC with HDMI® devices like televisions, monitors, etc.. With the DisplayPort™ 1.2 specifications and HDMI® this adapter may constitute a video bandwidth of up to 3 Gbit/s and a resolution of 4K Ultra HD (3840x2160@60 Hz).
Seite 9
Manual IB-AA508 Connection Diagram Configure a display device Please setup your display settings accordingly to your operating system and requirements. For detailed information, see the corresponding operation manual and description of your operating system. System requirements and information • Host computer with an available DisplayPort™ port.
Seite 10
HDMI® Geräten, wie Fernseher, Monitore, etc. Mit den Spezifikationen DisplayPort™ 1.2 und HDMI® kann dieser Adapter eine Video-Bandbreite von bis zu 3 Gbit/s und eine Auflösung von Ultra HD (3840x2160@60 Hz) darstellen. Dabei wird kein extra Treiber benötigt, die IB-AA508 funktioniert einfach per Plug & Play. Hauptmerkmale •...
Seite 11
Handbuch IB-AA508 Verbindungsdarstellung Monitoreinrichtung Zur optimalen Einstellung Ihrer Anzeigeeinheit gehen Sie bitte entsprechend Ihres Betriebssystems und Ihrer Bedürfnisse vor. Genauere Informationen entnehmen Sie bitte Handbuch und Beschreibungen Ihres Betriebssystems. Systemanforderungen und Informationen • Host-Computer mit einem freien DisplayPort™-Anschluss. • HDMI®-fähiges Display mit Kabel nach Bedarf (nicht im Lieferumfang enthalten) •...