Cleaning And Care - SupportPlus Retro SP-ICB-001-E Bedienungsanleitung

ABOUT THE BLENDER
MOTOR AND MOTOR BASE
The powerful two-speed motor is the heart of the appliance and is de-
signed specifically for this unit. It is completely enclosed within the housing
(6). The motor uses a free-floating system to reduce noise and wear. In
order to make the motor work normally, please operate the motor accord-
ing to the quantity of food, choosing between low speed, high speed and
pulse. Please follow the instructions regarding the quantity recommenda-
tions in this book. On the bottom of motor base, there is hidden cord stor-
age.

CLEANING AND CARE

The blender's container parts are corrosion resistant and easily cleaned.
Before the first use and after every use, separate the container parts
(items 1-6) and clean thoroughly in warm, soapy water then rinse and dry
well. DO NOT WASH ANY PARTS IN AN AUTOMATIC DISHWASHER.
Check all parts before reassembly. If the processing blades are stuck or
difficult to turn, DO NOT USE THE BLENDER. Check by carefully turn-
ing the blades in a clockwise direction (opposite edges are sharp). Blades
should turn freely. If the glass container is chipped or cracked, DO NOT
USE THE BLENDER. Further use could result in the container breaking
during use. To take the blade out, use a cloth or tea towel.
USE OF DAMAGED OR NON-RECOMMENDED PARTS COULD RE-
SULT IN SEVERE PERSONAL INJURY AND/OR DAMAGE TO THE
BLENDER. See the next page for proper container assembly and user
instructions.
NEVER IMMERSE THE MOTOR BASE IN WATER. Before cleaning, al-
ways be sure to unplug the unit. The housing can be cleaned with a damp
cloth. If there is water accidentally spilt into the unit, the water will flow out
through the water outlet.
The motor is permanently lubricated and does not require any additional
lubrication.
CAUTION: Follow these important steps to assemble, tighten, and mount
the blender container correctly; INJURY MAY RESULT IF MOVING
BLADES ARE ACCIDENTALLY EXPOSED.
4