Step 3 Connecting The Unit - Sony VPL-VW320 Kurzreferenz

Step 3
When making connections, be sure to do the following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor
picture quality. When pulling out a cable, be sure to pull it out from the plug, not the cable
itself.
• Refer to the operating instructions of the connected equipment.
Right side of the unit
: Video signal flow
Note
Even if the cable is connected to the HDMI INPUT 1 connector, the signal compatible with HDCP
2.2 cannot be displayed correctly, Be sure to connect the cable to the HDMI INPUT 2 connector
(VPL-VW320).
Connecting the Unit
Equipment with HDMI
output connectors
HDMI cable (not supplied)
Use a High Speed HDMI cable or a Premium High Speed
HDMI cable on which the cable type logo is specified.
For more information, refer to "Connections and
Preparations" in the Operating Instructions contained in
the supplied CD-ROM.
Computer
AV amplifier
Speakers
to HDMI output
15
GB