Maintenance; Caring For The Fastening Tool; Cleaning The Fastening Tool - FISCHER FGC 100 Benutzerhandbuch

8

Maintenance

8.1 Caring for the fastening tool

• Clean the tool with a cloth at regular intervals
• Keep the grip areas free from oil and grease
• Do not use pressure jet washers or running water for cleaning
• Only use the fischer cleaning spray. Do not use cleaning sprays with silicone.
• Never use the tool when the air slots are blocked.

8.2 Cleaning the fastening tool

Note: The tool must be cleaned and serviced regulary.
We recommend that a cleaning service is carried out, at least after driving 20,000 nails.
• Clean the tool if malfunctions such as misfiring occur increasingly.
• For cleaning, use only the fischer cleaning set and observe the illustrated cleaning instructions
enclosed with the cleaning set.
• Use only genuine fischer spare parts to ensure safe and reliable operation.
Following illustrations (see next page) describe the cleaning process of the tool.
EN
37