Declaration Of Conformity; Specified Use - FISCHER FGC 100 Benutzerhandbuch

1

Declaration of conformity

We declare under our sole responsibility: This gas actuated fastening tool, FGC 100, complies with
all relevant requirements of the directives *1) and standards *2). Technical data at *3) – see page 43.
03.02.2020
Florian Birkenmayer
Head of the Board of Directors fixing systems division and
Managing Director Development and Product Management
2

Specified use

The gas actuated fastening tool is designed to drive suitable nails into concrete, steel, solid bricks,
sand lime masonry and other materials suitable for the direct fastening technique. The gas tool, fuel
cell, battery and nails form a technical unit. Trouble free fastening can only be ensured if only the
recommended battery, fuel cell and nails manufactured by fischer are used. Only use the tool as a
hand-held device.
→ only use the fischer battery FGC 100 - B 7,2V 2,5Ah with this product (*A) – see page 34
→ only use the fischer battery charger FGC 100 - BC to charge the battery (*B) – see page 34
→ only use the fischer fuel cell FC 165 with this product (*C) – see page 34
→ only use the fischer nails DFN/DFNH with this product (*D/*E) – see page 34
The user bears sole responsibility for any damage caused by improper use. Generally accepted
accident prevention regulations and the enclosed safety information must be observed.
EN
27