58 www.electrolux.com
Problem
DEMO appears on
the display
7.1 Warning signal
The warning signals of the control and
signalling system of the appliance are dis-
played on the Visual Display.
The system will give out a signal if:
• An error has occurred in the operation
of the appliance. In case the electronic
system of the appliance cannot identify
the real temperature a sign will appear
on the temperature display.
• Until the staff of the customer service
arrive at the spot and solve the prob-
lem, the appliance will continue operat-
ing with the help of a spare program.
Possible cause
The door is not closed
correctly.
The temperature regulator
is not set correctly.
The appliance is in dem-
onstration mode. (dEMo)
7.2 Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Service Cen-
ter.
7.3 Closing the door
1.
2.
3.
Solution
Refer to "Closing the door".
Set a higher temperature.
Keep the OK button press-
ed for approximately 10
second until a long sound
of buzzer is heard and the
display shuts off for a short
time; the appliance starts
working regularly
Clean the door gaskets.
If necessary, adjust the door. Refer to
"Installation".
If necessary, replace the defective
door gaskets. Contact the Service
Center.