Information Display - sparklike HANDHELD Kurzhandbuch

Inhaltsverzeichnis

Verfügbare Sprachen

12. HOW TO TURN OFF THE LOG MODE

1. From the main menu scroll, by turning the encoder button, to the LOG ON/OFF

From the main menu scroll, by turning the encoder button, to the LOG ON/OFF

menu.

2. Select this by pressing the encoder button once.

3. A screen will display that the log mode has been turned off.

4. When measuring, a text is displayed that the measurements have not been logged.

5. To create a new log file with a new name, repeat procedure explained in chapter

10.

NOTE! When Sparklike Handheld is connected to a computer and the log ﬁ les have

been retrieved, the log memory will be deleted from Sparklike Handheld device. This

is the only way of emptying the memory and should be done every now and then to

prevent the memory from overﬁ lling.

13. ENABLING THE CONNECTION WITH YOUR COMPUTER

Sparklike Handheld log data can be downloaded to your computer. In order to do

this, Sparklike Handheld has to open its communication port to your computer. This is

performed before enabling the connection from the computer.

1. From the main menu scroll, by turning the encoder button to the PCCONNECT

From the main menu scroll, by turning the encoder button to the PCCONNECT

2. Select by pressing the encoder button once.

3. A screen will display that the PC communication is enabled.

4. Sparklike Handheld is open for communication with the PC.

14. INFORMATION DISPLAY

You can retrieve the device serial number and calibration information through SETUP >>

INFO.

Inhaltsverzeichnis