Riding Operation - SXT Light Plus V eKFV Handbuch

Riding Operation

3.4 RIDING OPERATION
Getting Ready!
1. Choose a suitable venue for riding.
2. Unfold the scooter in accordance with the instructions and make sure the safty pin is
engaged.
3. Adjust the T-pipe to the suitable height according to your height.
Start
1. Press the power button to turn on the power.
2. Stand one foot on the scooter and leave another foot on the ground.
3. Gently press down on the right thumb accelerator, the scooter will immediately move
forward slowly. Place the previous foot on the scooter. Press the right thumb accelerator
with your right thumb. The greater pressure you put, the faster it will go.
Brakes
1. Under normal conditions, the right thumb brake lever is pushed down and the
electromagnetic brake is activated and the scooter immediately slows down and the flow of
energy to the engine is interrupted. The more the brake lever is pushed down, the more the
scooter brakes. The electromagnetic brake additionally activates the kinetic energy recovery
system (KERS), which feeds the braking energy back into the battery in the same way as with
Fomel 1 cars.
2. The Scooter also have a conventional mechanical foot brake at the rear. The mechanical
brake slows down the scooter on the rear axle. No matter what situation you are in - if the
first system fails, you still have the mechanical foot brake on the rear axle at your disposal.
3. The "SXT Light Plus V eKFV models" have a brake lever on the right handle that can be
pulled.
Kick starter
This function is designed for safety reasons. The option allows the acceleration to be
activated only the scooter is first pushed with the foot and the wheel is in motion, ensuring
that the acceleration lever is not actioned by mistake. The zero start function is not activated
by default, you need to activated it after the purchase of the scooters.
This function can be activated or deactivated from the central control unit, according to the
user' s needs.
36