Menu For Speed Limit; Error Code; Display - SXT Light Plus V eKFV Handbuch

2.3 MENU FOR SPEED LIMIT

Turn off display
•
Press and hold thumb brake
•
Power the display
•
The display will show "L1"
•
Move to menu with button [LIGHT] L1-L2-L3
•
L1= Limit the speed to 6km/h
L2= Limit the speed to 12km/h
L3= Limit the speed to 20km/h
To set up a new speed limit, press button[SET]
•
2.4 KICK START
For statutory reasons, the kickstart cannot be switched off!

2.5 Error Code

E1: Overcurrent protection (Motor does not move more
than 4 seconds)- this error clears after release the
acceleration throttle. If not clear, send to service.
E2/E4: Communication error (No communication for
more than 400ms) - this error clear when starting the
communication. If not clear, send to service.
E3: Overvoltage error (Battery voltage higher).
Put back original battery, other hardware
problem.
Black-Screen: Exposure under the sun for too long.
Place it in shadow and it will return to normal after a period of time. If not clear, send to service.

Display

31
%